Quality Paint at Sensible Prices

Search Brinlay

DESCRIPTION

A cost effective, white Oil Based Undercoat for most interior and exterior applications. Suitable for both new and re-paint work.

SUITABLE PAINTING SURFACES

Suitable for both interior and exterior use over gloss and semi gloss enamel paints, primers and bare timber internally.

GENERAL DATA

Gloss Selection Guide: Flat.

Colour: White.

Application: For best results use a brush, however it can be applied by roller or spray. When spraying, thin with Mineral Turps. Provide adequate ventilation. Temperature should be above 10ºC. Early exposure to steam, overnight dew, rain or hosing may result in damage or removal of the coating.

Coverage: Will cover approximately 14 sq. metres per litre. On rough or absorbent surfaces, this will be reduced. When spraying, coverage is approximately 10 sq. metres per litre.

Thinning: Mineral turpentine in accordance with manufacturer’s instructions.

Drying: Touch dry in 4 – 6 hours. Recoat 24 hours on a day of 25ºC and 50% relative humidity, but will be longer in adverse conditions.

Clean Up: Mineral turpentine

SURFACE PREPARATION

Sand and scrape all unsound and flaking surfaces. Remove any grease, oil or rust deposits. Fill imperfections with appropriate fill. Sand smooth, sand all gloss and semi gloss surfaces to give key. Bare spots to be primed with appropriate Brinlay Wood Primer.
Apply 1 – 2 coats of Contractors Choice Oil Undercoat.

HEALTH AND SAFETY

For detailed information, refer to the product label and the current Material Safety Data Sheet available through Brinlay Paints.

Flammability: This product is flammable. Store and use away from sources of heat and ignition.
Toxicity: Lead free. Dry film is non-toxic.

TRANSPORT AND STORAGE

Sizes:	4 litre, 10 litre and 15 litre
Dangerous Goods Class:	3.2
Flashpoint:	26°C
UN:	1263
Packaging Group:	III