Search Brinlay
News & Projects
- Brinlays'new Stain Sealer a HUGE SUCCESS !!
Brinlays' New "Stain-Cover"is causing a lot of excitement!
Trade painters are switching over from the expensive alternative in a BIG way after trying it only once!- APAS - Australian Paint Approval Scheme - What this means to you, our customer!
- APAS - Australian Paint Approval Scheme - What this means to you, our customer!
This is a set of PAINT STANDARDS issued by the Federal Government and administered by the CSIRO. - OUR NEW BLACKTOWN STORE
- Our newest large format store opened in early 2010 at 178 to 180 Main St Blacktown and has proven to be very popular with Trade Painters and DIY customers alike,
Interior
Exterior
Varnishes
Sealers
Trim Colours
Wood Stains
Inspirations Flat Enamel
DESCRIPTION
An extremely flat, oil-based, hard finish that is resistant to moisture and minimises surface imperfections. It is ideally an interior paint, but can be used externally in sheltered areas such as eaves, under verandahs etc.
SUITABLE PAINTING SURFACES
Ceilings, bathroom walls, any area requiring a flat finish similar to ceiling paint. For use on masonry and all correctly sealed and undercoated interior surfaces.
GENERAL DATA
Gloss Selection Guide (when viewing
at 60º angle to surface)
Approximately 0 – 3% at 60°
Colour: Can be tinted to a wide range of colours from a white base.
Application: Brush, roller or spray. Provide adequate ventilation. Temperature should be above 10ºC. Early exposure to steam, overnight dew, rain or hosing may result in damage or removal of the coating.
Coverage: Approx. 14 – 16 sq. metres per litre.
Thinning: Mineral turpentine in accordance with manufacturer’s instructions.
Drying: Touch dry in 3 – 4 hours. Recoat 24 hours on a day of 25ºC and 50% relative humidity, but will be longer in adverse conditions.
Clean Up: Mineral turpentine.
SURFACE PREPARATION
Previously Painted Surfaces: Sand and scrape
all unsound and flaking surfaces. Remove any grease, oil
or rust deposits. Fill imperfections with appropriate fill.
Sand smooth, sand all gloss and semigloss surfaces to give
key. Bare spots to be primed with appropriate Brinlay Wood
Primer.
Undercoat with Brinlay Oil Undercoat or Brinlay 100% Acrylic
Primer Sealer Undercoat. Finish with 1 – 2 coats of
Brinlay Flat Enamel.
New Interior Timber: Fill imperfections
and sand smooth. Apply one coat of Brinlay Oil Undercoat.
Finish with 1 – 2 coats of Brinlay Flat Enamel.
New Metal Surfaces: Clean and remove all rust, grease and oil deposits. Apply one coat Brinlay Zinc Phosphate or Galvanised Acrylic Primer for galvanised surfaces. Finish with 2 coats Brinlay Flat Enamel.
Plasterboard: Apply one coat Brinlay Oil Undercoat or one coat Brinlay 100% Acrylic Primer Sealer Undercoat. Finish with 1 – 2 coats Brinlay Flat Enamel.
HEALTH AND SAFETY
For detailed information, refer to the product label and the current Material Safety Data Sheet available through Brinlay Paints.
Flammability: This product is flammable. Store and use away from sources of heat and ignition.
Toxicity: Lead free. Dry film is non-toxic.
TRANSPORT AND STORAGE
Sizes: |
1 litre, 4 litre, 10 litre |
Dangerous Goods Class: |
3.2 |
Flashpoint: |
26°C |
UN: |
1263 |
Packaging Group: |
III |