Search Brinlay
News & Projects
- Brinlays'new Stain Sealer a HUGE SUCCESS !!
Brinlays' New "Stain-Cover"is causing a lot of excitement!
Trade painters are switching over from the expensive alternative in a BIG way after trying it only once!- APAS - Australian Paint Approval Scheme - What this means to you, our customer!
- APAS - Australian Paint Approval Scheme - What this means to you, our customer!
This is a set of PAINT STANDARDS issued by the Federal Government and administered by the CSIRO. - OUR NEW BLACKTOWN STORE
- Our newest large format store opened in early 2010 at 178 to 180 Main St Blacktown and has proven to be very popular with Trade Painters and DIY customers alike,
Interior
Exterior
Varnishes
Sealers
Trim Colours
Wood Stains
Premium Heavy Bodied Oil Undercoat
DESCRIPTION
A turps based paint which gives the surface excellent adhesion for additional paints. The inclusion of Linseed Oil improves the key properties to both old and newly painted surfaces. Oil undercoat has excellent sanding properties, filling, gloss hold-out.
SUITABLE PAINTING SURFACES
Suitable for both interior and exterior use over gloss and semigloss enamel paints, primers and bare timber internally. Especially suited to badly weathered, absorbent, previously painted surfaces where a turps based finish product is to be used.
GENERAL DATA
Gloss
Selection Guide
Flat.
Colour: White.
Application: For best results use a brush, however it can be applied by roller or spray. When spraying, thin with Mineral Turps. Provide adequate ventilation. Temperature should be above 10ºC. Early exposure to steam, overnight dew, rain or hosing may result in damage or removal of the coating.
Coverage: Will cover approximately 16 sq. metres per litre. On rough or absorbent surfaces, this will be reduced. When spraying, coverage is approximately 12 sq. metres per litre.
Thinning: Mineral turpentine in accordance with manufacturer’s instructions.
Drying: Touch dry in 6 – 8 hours. Recoat 24 hours on a day of 25ºC and 50% relative humidity, but will be longer in adverse conditions.
Clean Up: Mineral turpentine.
SURFACE PREPARATION
Sand and scrape all unsound and flaking surfaces. Remove
any grease, oil or rust deposits. Fill imperfections with
appropriate fill. Sand smooth, sand all gloss and semigloss
surfaces to give key. Bare spots to be primed with appropriate
Brinlay Wood Primer.
Apply 1 – 2 coats of Brinlay Heavy Bodied Oil Undercoat.
HEALTH AND SAFETY
For detailed information, refer to the product label and the current Material Safety Data Sheet available through Brinlay Paints.
Flammability: This product is flammable. Store and use away from sources of heat and ignition.
Toxicity: Lead free. Dry film is non-toxic.
TRANSPORT AND STORAGE
Sizes: |
500ml, 1 litre, 2 litre, 4 litre, 10 litre and 20
litre |
Dangerous Goods Class: |
3.2 |
Flashpoint: |
26°C |
UN: |
1263 |
Packaging Group: |
III |