Search Brinlay
News & Projects
- Brinlays'new Stain Sealer a HUGE SUCCESS !!
Brinlays' New "Stain-Cover"is causing a lot of excitement!
Trade painters are switching over from the expensive alternative in a BIG way after trying it only once!- APAS - Australian Paint Approval Scheme - What this means to you, our customer!
- APAS - Australian Paint Approval Scheme - What this means to you, our customer!
This is a set of PAINT STANDARDS issued by the Federal Government and administered by the CSIRO. - OUR NEW BLACKTOWN STORE
- Our newest large format store opened in early 2010 at 178 to 180 Main St Blacktown and has proven to be very popular with Trade Painters and DIY customers alike,
Interior
Exterior
Varnishes
Sealers
Trim Colours
Wood Stains
Premium Wood Primer - Pink or White
DESCRIPTION
An oil-based primer, which will penetrate into new unpainted timber surfaces, provide good coverage, and give an excellent base coat for subsequent paint coatings. Wood primers give an ideal surface necessary for the bond between the undercoat and the paint.
SUITABLE PAINTING SURFACES
Suitable as first coats on timber, weatherboard, doors, window frames and sills, fences, skirting boards etc. NB. Sand lightly before application of additional coats. Do not leave primed surfaces for extended periods prior to applying finish coats.
GENERAL DATA
Gloss
Selection Guide
Flat.
Colour: White or Pink.
Application: For best results use a brush, however it can be applied by roller or spray. Provide adequate ventilation. Temperature should be above 10ºC. Early exposure to steam, overnight dew, rain or hosing may result in damage or removal of the coating.
Coverage: Will cover approximately 14 – 16 sq. metres per litre.
Thinning: Mineral turpentine in accordance with manufacturer’s instructions.
Drying: Touch dry in 8 hours. Recoat 24 hours on a day of 25ºC and 50% relative humidity, but will be longer in adverse conditions.
Clean Up: Mineral turpentine.
SURFACE PREPARATION
Do not use paint on wet or damp surfaces.
Previously painted surfaces: Remove all loose and flaking paint by stripper, flame or hot air gun or mechanical means. Sand the area well, feathering off edges of remaining paints. Apply Brinlay Wood Primer.
New Timber: Suitable for all seasoned timber which is free from dirt, wax, mildew etc. Sand lightly before application and between additional coats. Do not leave for extended periods prior to applying finishing coats.
HEALTH AND SAFETY
For detailed information, refer to the product label and the current Material Safety Data Sheet available through Brinlay Paints.
Flammability: This product is flammable. Store and use away from sources of heat and ignition.
Toxicity: Lead free. Dry film is non-toxic.
TRANSPORT AND STORAGE
Sizes: |
500ml, 1 litre, 4 litre, 10 litre and 20 litre |
Dangerous Goods Class: |
3.2 |
Flashpoint: |
26°C |
UN: |
1263 |
Packaging Group: |
III |