Search Brinlay
News & Projects
- Brinlays'new Stain Sealer a HUGE SUCCESS !!
Brinlays' New "Stain-Cover"is causing a lot of excitement!
Trade painters are switching over from the expensive alternative in a BIG way after trying it only once!- APAS - Australian Paint Approval Scheme - What this means to you, our customer!
- APAS - Australian Paint Approval Scheme - What this means to you, our customer!
This is a set of PAINT STANDARDS issued by the Federal Government and administered by the CSIRO. - OUR NEW BLACKTOWN STORE
- Our newest large format store opened in early 2010 at 178 to 180 Main St Blacktown and has proven to be very popular with Trade Painters and DIY customers alike,
Interior
Exterior
Varnishes
Sealers
Trim Colours
Wood Stains
Pricewize Low Sheen Acrylic
DESCRIPTION
An interior/exterior, cost effective low sheen acrylic with
good opacity, adhesion and flexibility.
Excellent for washability and busy areas.
SUITABLE PAINTING SURFACES
All interior walls and ceilings where a low sheen finish is required, particularly in large living areas, bedrooms and hallways.
GENERAL DATA
Gloss
Selection Guide (when viewing at 60º angle to surface)
Approximately 5 – 10% at 60°
Colour: Can be tinted to a wide range of colours from a white base.
Application: Brush, roller or spray. Provide adequate ventilation. Temperature should be above 10ºC. Early exposure to steam, overnight dew, rain or hosing may result in damage or removal of the coating.
Coverage: Approx. 14 – 16 sq. metres per litre.
Thinning: Up to 100ml of clean water per litre for spraying or application to very porous surfaces.
Drying: Touch dry in 30 minutes. Recoat 2 hours on a day of 25ºC and 50% relative humidity, but will be longer in adverse conditions.
Clean Up: Water and detergent. Dried spots can be removed using Brinlay General Purpose Thinners.
SURFACE PREPARATION
Previously painted surfaces:
- Ensure all surfaces are cleaned of dirt, dust, powder, grease, oil, smoke stains, cooking residues, polishes and materials detrimental to the finish and adhesion of the new paints by washing with water and detergent or sugar soap (as appropriate), rinse clean any residues.
- Sterilise mould or moss with bleach or Brinlay Fungicidal Wash.
- Fill surface holes with an appropriate filler and sand to match existing surface. Sand all gloss and semigloss paints to a flat look. Remove flaked, cracked, peeling and poorly adhered unsound paints which should be tested as follows:
- Test surface at random by cutting a small cross (X) through the existing paints. Apply and press down firmly a piece of sticky tape over the cut. Hold the end of the tape and rip off. If the paint is removed, check other areas. Paints consistently failing test or, if any doubt to their adhesion, should be completely removed.
- Poor surfaces or dark colours should be undercoated with Pricewize Acrylic Sealer Undercoat before application of Pricewize Low Sheen Acrylic.
New Interior Surfaces (Plasterboard):
Apply one coat Pricewize Acrylic Sealer Undercoat. Finish
with 1 – 2 coats Pricewize Low Sheen Acrylic.
HEALTH AND SAFETY
For detailed information, refer to the product label and the current Material Safety Data Sheet available through Brinlay Paints.
Flammability: This product is non-flammable. Store and use away from sources of heat and ignition.
Toxicity: Pricewize Low Sheen Acrylic is non-toxic, environmentally friendly, lead free and non-hazardous.
TRANSPORT AND STORAGE
Sizes: |
4 litre, 10 litre and 20 litre |
Dangerous Goods Class: |
N/A |
Flashpoint: |
N/A |
UN: |
N/A |
Packaging Group: |
N/A |